Brian Poisoning 美式放毒區

Brian · 发表于 2009-9-17 21:11:33

FINALLY!!! The parts for the Paladin have cleared Customs and are being delivered to the garage tonight! We start working on modifying the Paladin tomorrow morning. This thread will show all of the modifications - step bystep. The following is a parts list for the modifications:

Articulator Suspension Package With Bilstein shocks （Articulator悬挂升高套件+Bilstein 减震）
Steering Enhancement Package （转向性能升级套件）
Xterra 2 Inch Body Lift （Xterra2英寸车体升高配件）
Stainless Steel Braided Brake Lines （不锈钢编织状刹车线）
Xterra Rear Quick Disconnects （Xterra 后桥平衡杆快速连接/断开杆）
Warn Premium Manual Locking Hubs （Warn手动前桥轮毂锁止器）
CV Axle Assembly （前桥驱动轴）
R200A Ring & Pinion/5.142 （前桥主减锥齿轮组一对）
H233B Ring & Pinion/5.142 （后桥主减锥齿轮组一对）
ARB Air Compressor （ARB气泵）
Front Air Locker （前桥差速锁）
Rear Air Locker （后桥差速锁）
Parflex Air Hose （Partflex 气泵用软管）
Xterra Transfer Case Gears （Xterra分动箱分动齿轮组一对）
Xterra Snorkel （Xterra 涉水喉)

[ 本帖最后由 Brian 于 2009-9-17 21:18 编辑 ]

小兜兜 · 发表于 2009-9-17 21:46:08

这些东西太毒了

zhaokai4007 · 发表于 2009-9-17 21:51:58

小兵乱开车 · 发表于 2009-9-18 15:06:42

期待Brain的试车大会，哈哈哈

ocar · 发表于 2009-9-18 18:36:17

Brain,

we go Suzhou after the national day.

小兵乱开车 · 发表于 2009-9-18 22:43:54

B哥的车子几时可以搞定啊？

Brian · 发表于 2009-9-19 08:23:42

This is what the Paladin looks like now

[ 本帖最后由 Brian 于 2009-9-19 08:26 编辑 ]

Brian · 发表于 2009-9-19 13:16:11

A few things have changed since yesterday ... the 2 inch body lift is installed.

Two inch body lift parts

Two inch body lift parts

Two inch blocks installed

Two inch blocks installed

Two inch blocks installed

Brian · 发表于 2009-9-19 13:17:19

Also the rear revolver shackles and leaf springs were installed

Rear Revolver Shackles

Rear Leaf Springs

Right Rear Before Install

Rear Revolver Shackles Installed

New Rear Revolver Shackles with Old Shackle

Rear Leaf Springs Installed

老K · 发表于 2009-9-20 21:26:15

let's go to Suzhou Tanke Base for some practice once you settle down every stuff

Brian · 发表于 2009-9-20 21:33:21

原帖由老K 于 2009-9-20 21:26 发表
let's go to Suzhou Tanke Base for some practice once you settle down every stuff

That sounds like a great idea! Lets do it!

Brian · 发表于 2009-9-20 21:34:07

Today we reinforced the A-arm mounts to handle the additional stress of the suspension lift's modified A-arms

A-arm mounts (before)

A-arm mounts (before)

reinforced A-arm mounts

reinforced A-arm mounts

Brian · 发表于 2009-9-20 21:35:22

We also installed the Bilstein steering stabilizer kit and the idler arm brace

idler arm brace

Brian · 发表于 2009-9-20 21:36:21

We also finished installing the rear Bilstein shocks, the rear quick disconnects and the longer brake lines

Brian · 发表于 2009-9-20 21:37:25

We finished installing the ring and pinion gears, rebuilt the differentials, installed the new CV assembly and front A-arms.

installing the ring and pinion gears

CV assembly and A-arms

Rear Differential

		自动登录	找回密码
密码			加入我们